3 Series E36 325i (M50) CONVER
00 11 500
Checking/topping up oil level in automatic
transmission (A5S 310Z)
Caution!
Automatic transmission oil,
refer to BMW Service Operating Fluids.
1. Topping up transmission oil level after a repair:
Selector lever in setting "P".
The vehicle must be horizontal and secured to prevent it from
rolling away.
Unfasten filler screw (2).
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 24 11 7AZ
Top up automatic transmission until oil emerges at filler/overlfow
bore.
Start engine.
Top up automatic transmission until oil emerges at filler/overflow
bore.
Screw in filler screw (2).
Operate brake and change up and down all gears at idle speed.
Connect BMW Diagnosis and Information System (DIS) and/or
BMW MoDiC to vehicle and perform oil level check in accordance
with instructions.
2. Checking oil level:
Connect BMW Diagnosis and Information System (DIS) and/or
BMW MoDiC to vehicle and perform oil level check in accordance
with instructions.
RA Checking/topping up oil level in automatic transmission (A5S 310Z)
BMW AG - TIS
08.02.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -