3 Series E36 325i (M50) CONVER
Tighten VANOS control unit.
Unlock secondary tensioner.
Note:
It is absolutely necessary to pull the chain into the root of teeth
on the sprockets for timing diagram adjustments since
introduction of rubber-lined sprockets.
Preload clamping rail with special tool 11 3 390 by rotating the
adjusting screw with special tool 00 2 050 or standard torque
wrench to torque of 1.3 Nm.
RA Adjustment specification for camshaft (M50 VANOS)
BMW AG - TIS
08.02.2013 06:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
