3 Series E36 325i (M50) CONVER
Unfasten top and loosen bottom right and left engine mounts.
Unfasten ground wire.
Prepare special tool kit 00 0 200 comprising special tool
00 0 201/202/204/206.
Unclip oil lines for hydraulic steering from holder on engine carrier
and place aside.
Fit special tool 00 0 206 to engine mounting.
Caution!
Check continuously while lifting to make sure that electric
wires, ducts and hoses are not stretched or pinched. Maintain
distance (gap) between engine and face wall.
Lift engine carefully as far as possible.
RA Removing and installing, sealing or replacing oil pan ( M50 to 9 / 92 )
BMW AG - TIS
08.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
