3 Series E36 325i (M50) CONVER
If solenoid does not react, Special Tool 61 2 050 must be
connected on other pin of two-pin connector of Special Tool
61 1 476.
Again connect Special Tool 61 2 050 to vehicle earth.
Switching of solenoid must be heard and felt.
Dynamic Test:
Start and run engine at idle speed.
Again connect Special Tool 61 2 050 to vehicle earth.
Engine runs very erratically or dies.
If solenoid is not operated in this test, another test must be carried
out with Special Tool 12 6 410.
Connect Special Tool 12 6 410 to connector of solenoid.
Connect red clip to battery positive connection point. Connect
black clip to vehicle earth.
Caution!
Reversing terminals on Special Tool will destroy installed
diode on VANOS solenoid valve. Solenoid valve remains
serviceable but current spikes can give rise to faults in vehicle
circuit.
RA Checking operation of VANOS (M50)
BMW AG - TIS
08.02.2013 06:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
