3 Series E36 325i (M50) CONVER
13 54 030
Removing and installing throttle-valve
assembly (M50)
Loosen hose clamp and pull off gaiter.
Open clamps and remove air-mass sensor with gaiter.
Disconnect cables (1 and 2).
Installation:
Adjust cables,
refer to relevant Construction Group 35/65
Loosen hose clamps (1) and push back hoses (2).
Pull off connector from throttle-valve switch.
RA Removing and installing throttle-valve assembly (M50)
BMW AG - TIS
08.02.2013 07:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -