3 Series E36 325i (M50) CONVER
Unfasten screws (A,B,C)
(17 off).
Installation:
Screws (A) M6x45
Screws (B) M6x40
Screws (C) M6x33
Caution!
Do not damage seal between shift unit and transmission case.
Hold shift unit with one hand.
Unfasten screws (A,C) and carefully remove shift unit.
Installation:
Screw (A) M6x45
Screw (C) M6x33
Secure shift unit with screws (A,C).
Insert screws into shift unit until contact is made, then tighten
down screws.
Tightening torque, refer to Technical Data 24 30 1AZ
RA Removing and installing/replacing shift unit (A5S 300J)
BMW AG - TIS
08.02.2013 09:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -