3 Series E36 325i (M50) CONVER
Replace self-locking nut and tighten down to Tightening Torque =
17 Nm.
Tighten screw cap to Tightening Torque = 32 Nm and secure by
peening.
Insert foil insert (1) and replace O-ring (2).
Grease and install pressure piece (4), spring (2) and O-ring (3).
Tighten adjusting screw (1) down to determined screw-in depth
and align all the marks.
Secure adjusting screw by peening.
Caution!
The rack must be able to move freely over the entire range of
travel.
RA Dismantling and reassembling power steering gear
BMW AG - TIS
08.02.2013 11:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -