3 Series E36 325i (M50) CONVER
34 32 861
Replacing all brake pipes
Note:
Brake pipes are only supplied straight, in correct length and
fitted with connecting nipples.
New brake pipes must be bent as required using special tool
34 5 100.
Removed brake pipes can be used as templates for bending.
Caution!
-
Protective coat on brake pipes must
not be damaged while bending.
-
Brake pipes must not be bent back and
forth.
-
Tighten brake-pipe couplings
with torque wrench.
Tightening torque, refer to Technical Data
Caution!
After completion of work, bleed brake system.
Vehicle without ABS, refer to 34 00 046
Vehicle with ABS, refer to 34 00 047
Vehicle with ABS/ASC+T, refer to 34 00 048
RA Replacing all brake pipes
BMW AG - TIS
08.02.2013 12:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -