3 Series E36 325i (M50) CONVER
Unfasten screws and washers.
Disconnect convertible top drive rod (2) at back and place to one
side.
Disconnect drive rod on clamping bracket (4) and pull forwards.
Installation:
Secure screw with Loctite 270 (Source of Supply: BMW
Parts).
Pull clamping bracket drive rod (4) upwards with lever (3) and
remove.
Adjustment:
Unfasten lock nut and disconnect clamping bracket drive rod (4)
by pulling forwards.
Pull clamping bracket drive rod (4) forwards, i.e. in direction of
travel, until the roller locates firmly in the fork of the drive lever.
RA Replacing linkages (both) for convertible top drive unit
BMW AG - TIS
08.02.2013 18:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
