3 Series E36 325i (M50) COUPE
Removing tensioning roller with mounting
block (M50)
Unscrew tensioning roller.
Unscrew mounting block.
Note:
The hydraulic belt tensioner is filled with oil, so that a removed
element must always be stored standing upright.
Incorrrectly stored elements can normally be bled by
compressing several times.
Installation:
Check installed direction.
RA Removing tensioning roller with mounting block (M50)
BMW AG - TIS
08.02.2013 07:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -