3 Series E36 325is (M50) COUPE
Unfasten screws on transmission case (9 off).
Remove transmission from assembly frame 00 1 490 and put
down with the output side facing upwards.
Fit special tool 23 1 141 together with 23 1 142 and
23 1 143 and install on rear case section.
Pull off rear case section.
Remove middle selector rod until all 3 selector rods are at the
same height.
Remove retaining plate (1) and magnetic disc (2).
RA Complete removal and installation of input and output shafts (S5D 200G/ 250G)
BMW AG - TIS
08.02.2013 13:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -