3 Series E36 325td (M51) SAL
Install pedal-value sensor.
Attach linkage on accelerator pedal (3).
Initial Adjustment with Removed Operating Lever
Components:
1.
Lever
2.
Washer
3.
Nut
Adjust angle A = 16
°
.
Fit nut.
Tightening torque, refer to Technical Data 12 72 1AZ
Perform function check:
Check idling position and/or full load position with a BMW
SERVICE TESTER or MoDiC.
Read error memory of DDE control unit, check faults in memory,
rectify faults and then clear the error memory
RA Removing and installing or replacing accelerator sensor (M51, M41)
BMW AG - TIS
08.02.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
