3 Series E36 325tds (M51) TOUR
11 13 000
Removing and installing, sealing or replacing
oil pan ( M51 from 9 / 92 )
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
Removing engine splash guard.
Draining off engine oil,
refer to 00 0 249
Empty oil tank for power steering. Release oil lines from power
steering unit. Unfasten steering spindle from steering gear.
These operations are described in section on removing and
installing steering gear,
refer to 32 13 060
Remove cover for intake line.
Release rubber boot.
Removing intake filter housing,
refer to 13 71 000
Prepare special tool 00 0 200, consisting of special tool
00 0 201/202/204/206.
RA Removing and installing, sealing or replacing oil pan ( M51 from 9 / 92 )
BMW AG - TIS
08.02.2013 18:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
