3 Series E36 325tds (M51) TOUR
Alignment of the flanged joint.
Note:
Sealing taper is produced by upset pipe.
Installation:
Lubricate flanged joint lightly with copper paste -CRC-, refer to
BMW Parts Service.
Turn flanges until maximum possible ground clearance is
provided.
Align the flanges parallel to each other.
Insert screws.
M41
Loosen the clamp on the exhaust bracket.
Installation:
Insert screws.
M51
Loosen the clamp on the exhaust bracket.
RA Removing and installing / replacing exhaust-catalytic converter (M41, M51)
BMW AG - TIS
08.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -