3 Series E36 325tds (M51) TOUR
33 32 071
Replacing one upper control arm
Caution!
After completion of work, perform chassis alignment check,
refer to 32 00 150.
Remove barrel spring,
refer to 33 53 000.
Unscrew stabilizer support.
Unscrew screw.
Installation:
Tightening Torque,
refer to Technical Data 33 32 11AZ.
RA Replacing one upper control arm
BMW AG - TIS
09.02.2013 00:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -