3 Series E36 325tds (M51) TOUR
Expose connection point for corner section of tail panel on lamp
support, side panel and tail panel.
Open connection points.
Open brazed seams.
Expose connection point on trunk floor.
Expose and open up connection point between right tail panel and
lower tail panel.
Remove corner section of tail panel.
Straighten and grind joint surfaces.
Fit spare part.
Mark out holes for plug-welding.
RA Replacing left or right tail panel (touring) (side panel and/or tail panel remov
BMW AG - TIS
09.02.2013 02:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
