3 Series E36 328i (M52) COUPE
11 12 100
Removing and installing/sealing cylinder head
(M52 / S52)
Remove intake filter housing with air-mass flow sensor,
refer to 13 71 000.
Remove cylinder head cover,
refer to 11 12 000.
Remove all spark plugs,
refer to 12 12 011.
Disconnect intake air manifold,
refer to 11 61 050.
Remove VANOS adjustment unit,
refer to 11 36 010.
Detach cylinder recognition sensor,
refer to 12 14 525.
Drain off coolant and dispose of correctly.
Installation:
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Vent cooling system and check for leaks,
refer to 17 00 039.
Remove exhaust pipe from exhaust manifold.
Release water hose from branch flange.
Unfasten heating intake and heating return hoses.
RA Removing and installing/sealing cylinder head (M52 / S52)
BMW AG - TIS
09.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
