3 Series E36 328i (M52) COUPE
Arrange bucket tappets by cylinder and place on special tool
11 3 030 in correct order.
Insert special tool 11 1 441 from below in special tool
11 1 065 and secure with special tool 11 1 045 .
Align special tool 11 0 345 in direction of valve shaft and select
appropriate groove in special tool 11 0 342 .
Press down valve spring on spring cap, top, and remove valve
keys.
Remove valve spring and plate spring.
RA Replacing all valve springs (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
09.02.2013 12:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -