3 Series E36 328i (M52) COUPE
Tighten bow cover with special tool 11 4 220 by rotating the
adjusting screw with special tool 00 9 250 or preload with
standard torque wrench to 1.3 Nm.
Tighten down sprocket of exhaust camshaft in two passages.
Tightening torque, 11 31 3AZ .
Remove special tool 11 3 240 .
Remove special tool 11 2 300 .
RA Removing and installing or replacing VANOS adjustment unit (M52/S52)
BMW AG - TIS
09.02.2013 12:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -