3 Series E36 328i (M52) COUPE
Unfasten hydraulic line on VANOS adjustment unit.
Tightening Torque,
refer to Technical Data 11 36 2AZ.
Release screw on sensor.
Note:
Screw is plastic-coated.
Replace screw.
Installation:
Check seal and replace if necessary.
Disconnect plug connection (3). Plug connection illustrated here
with intake manifold removed.
Installation:
Interrogate fault memory of DME control unit, check faults in
memory, then cancel fault memory.
RA Replacing sensor for cylinder recognition (M52,S50US,S52)
BMW AG - TIS
09.02.2013 12:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
