3 Series E36 328i (M52) COUPE
Unscrew bolts.
Remove vacuum hose from pressure regulator.
Pull injection tube and injection valves upwards to remove.
Lift out retainer and remove injection valve.
Installation:
Check -rings, replacing them if necessary.
For assembly, coat O-rings (nothing else) with Vaseline or
transmission oil SAE 90.
interrogate fault memory of DME-control unit, check faults
stored in memory, rectify faults then cancel fault memory.
RA Removing and installing / replacing all injection valves (M52)
BMW AG - TIS
09.02.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -