3 Series E36 328i (M52) COUPE
25 16 050
Removing and installing selector lever with
mounting block
Remove fillister head screw (internal hexagon 3 mm).
Pull off handle with pull rod.
Installation:
Button not pressed.
Attach pin (1) of button in bore hole (2) of pull rod.
Remove clock or on-board display.
Remove panel at bottom.
Remove cover for selector lever.
Pull plug (3) on EGS switch and indicator light (4).
RA Removing and installing selector lever with mounting block
BMW AG - TIS
09.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -