3 Series E36 328i (M52) COUPE
Installation:
Press-fit new taper roller bearing inner races cold with special
tool 33 1 003 (sleeve).
Lift shaft seals out of both bearing caps.
Press out outer bearing race with special tool 33 1 350
(extractor fixture) and special tool 33 1 351 (extractor star tool).
Caution!
Special Tool must engage in the bearing outer race.
Installation:
Press-fit new bearing outer races with special tool 33 1 365
(pressure plate).
RA Replacing input bevel gear and crown wheel (Type M) - final drive housing remove
BMW AG - TIS
09.02.2013 18:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -