bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Or Replacing Left Or Right Front Side Panel|Page 2019 > < 2 RA Installing Shaped Parts For Cavity Bulkheads, Except For Cover For Side Member|Page 2017
Page 1
background image

41 35 000

Removing and installing or replacing left or
right front side panel

Remove inside wheel housing cover.

Remove edge protector from top of side panel.

Unscrew bolt (1). Loosen bolt (2).

Unscrew upper mounting bolts.

Unscrew bolts on underside.

Unscrew bolts.

Installation:

Before painting, check the hole pattern in the side panel/front
trim panel, and drill new holes in the front trim panel if
necessary.

Deburr new bores.

RA  Removing and installing or replacing left or right front side panel

BMW AG - TIS

09.02.2013  21:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing Or Replacing Left Or Right Front Side Panel|Page 2019 > < 2 RA Installing Shaped Parts For Cavity Bulkheads, Except For Cover For Side Member|Page 2017