bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Headliner For Sun-roof Lid|Page 2368 > < 6 RA Replacing Lever (release Lever) For Lid At Rear Of Slide_tilt Sun Roof|Page 2366
Page 1
background image

54 12 132

Removing and installing/replacing headliner
for sun-roof lid

Installation:

If necessary, apply light coat of Renax GL1 (Fuchs) grease
to guide duct.

Remove sun-roof lid,

refer to 54 12 100

The mechanism must be lowered at the back by dimension (A). If
necessary, lower as with the installed slide/tilt sunroof cover.

Distance (A) = 2 to 3 mm

Slowly slide floating roof liner right back (with clean hands, or
wearing protective gloves).

Version with rotary tumbler:

Slide headliner back slightly and unfasten 2 Torx screws (rotary
tumbler) on left side.

RA  Removing and installing/replacing headliner for sun-roof lid

BMW AG - TIS

09.02.2013  23:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Headliner For Sun-roof Lid|Page 2368 > < 6 RA Replacing Lever (release Lever) For Lid At Rear Of Slide_tilt Sun Roof|Page 2366