3 Series E36 328i (M52) COUPE
Remove pulley with a standard three-arm extractor tool.
Caution!
Only fit extractor lugs to the joint between magnet coil and
pulley since otherwise the pulley can be damaged.
Installation:
Carefully drive pulley onto bearing seat with special tool
33 1 020.
Spread and remove circlip. Unscrew bolt (1). Disconnect plug
connection (2) and remove magnet coil.
RA Replacing compressor clutch (for Seiki compressor)
BMW AG - TIS
10.02.2013 01:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -