3 Series E36 M3 (S50) CONVER
11 12 000
Removing/installing/sealing cylinder-head
cover (S50)
Unscrew bolts.
Remove ignition-coil cover.
Disconnect connector from ignition coils
Unscrew earth connection (1). Unscrew securing screws at cable
guide (2) and put cable guide to one side.
Remove grommet from cable leading to ignition coils and remove
cylinder-head cover.
RA Removing/installing/sealing cylinder-head cover (S50)
BMW AG - TIS
09.02.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
