3 Series E36 M3 (S50) CONVER
Slacken remaining two bolts on chain wheel on VANOS
transmission approx. 2 turns, but do not remove.
Unscrew bolts 6 to 9 of VANOS control unit.
Important!
VANOS radial piston pump drive could fall into engine. For
this reason, drive must be held in position with a finger while
pulling off VANOS control unit.
Pull off VANOS control unit together with splined shaft.
Remove drive for VANOS radial piston pump.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -