3 Series E36 M3 (S50) CONVER
Important!
Note direction and angle of rotation.
Rotate exhaust camshaft with open-end wrench upwards from
horizontal position until groove on camshaft guide bearing aligns
with groove on 1st bearing cap.
Note:
Relative positions of sprocket wheel and marker wheel;
sprocket wheel to camshaft and sprocket wheel to drive shaft
are all defined by dowel pins.
Fit sprocket wheel and drive shaft for radial piston pump on
exhaust camshaft with timing chain attached.
Tighten screws firmly down with special tool 11 3 470.
Fit open-end wrench to hex on intake camshaft.
Important!
Note direction and angle of rotation.
Rotate inlet camshaft with open-end wrench upwards from
horizontal position until groove on camshaft guide bearing aligns
with groove on 1st bearing cap.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -
