3 Series E36 M3 (S50) CONVER
Caution!
Use original antimagnetic screws only.
Secure toothed hub with two screws. Fit screws without clearance
but do not tighten.
Install chain tensioning piston,
refer to 11 31 090.
Caution!
Note direction of installation of special tool 11 7 341.
Fit special tool 11 7 341/342 to intake camshaft.
Turn intake camshaft on hex head away from 10
°
setting until
special tool 11 7 341 fits flush against timing case.
Fit special tool 11 7 342 into exhaust camshaft.
Align exhaust camshaft on hex head with special tool 11 7 341
flush against timing case.
Remove special tool 11 7 341 / 342.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -
