3 Series E36 M3 (S50) CONVER
S50 B32
Caution!
Strong spring force.
Unfasten screw plug and remove hydraulic chain tensioner.
Installation:
If a hydraulic chain tensioner is reused, the oil chamber in the
tensioner unit must first be drained.
Place hydraulic chain tensioner on level base and carefully
compress.
Repeat this procedure twice.
Installation:
Replace sealing ring (3).
Insert hydraulic chain tensioner (1) in cylinder for chain
tensioner piston (2) and engage guide lugs in clamping rail.
Insert cylinder for chain tensioner piston and tighten down.
Tightening torque,
refer to Technical Data 11 31 8AZ
RA Removing and installing/replacing piston for chain tensioner (S50)
BMW AG - TIS
09.02.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
