3 Series E36 M3 (S50) CONVER
Remove special tool 11 5 080 from inlet camshaft.
Remove special tool 11 2 300.
Fit special tool 11 5 100 to four screws on crankshaft hub.
Turn crankshaft further in direction of rotation until two other bolts
of the sprocket on VANOS gearbox are accessible.
Tighten these two screws to final torque of 10 Nm.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 21 -