3 Series E36 M3 (S50) CONVER
Disconnect compressed air.
Remove special tool 11 7 350.
Press toggle switch on special tool 12 6 412 into position for
retracting VANOS splined shaft.
Hydraulic piston is vented.
At the same time, press splined shaft and hydraulic piston back
into initial position by hand.
Connect special tool 12 6 412 to the solenoid valves on the
exhaust end.
Press toggle switch on special tool 12 6 412 into position for
retracting VANOS splined shaft.
Hydraulic piston is vented.
At the same time, press splined shaft and hydraulic piston back
into initial position by hand.
Disconnect special tools 12 6 412 and 12 6 410 from the
solenoid valves.
Replace sealing rings.
RA Adjusting timing of camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -