bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing (replacing) Power Window Unit In Left Or Right Front Doo > < 1 RA Disconnecting And Connecting Battery
Page 1
background image

51 32 ...

Safety instructions on risk of finger-jam

When working on doors with power window regulators, disconnect connector from window regulator motor (risk of
jamming fingers). This means that the control unit memory erases the position of the door window.

Keep to the following sequence if the power window motor has to be operated for the next work step:

1. 

Open the door

2. 

Close the rotary latch lock by hand

3. 

Connect the plug on the power window motor

4. 

The door window can be raised and lowered (without the automatic up/down function)

Caution!

The door must not be locked (rotary latch lock would be damaged). Operate the door handle to open the rotary
latch lock.

1. 

Initialising window regulator,

refer to 61 35 ...

2. 

Adjust door window (coupé, convertible), 

refer to 51 32 605

Adjusting door window (sedan, touring, compact), 

refer to 51 32 154

RA  Safety instructions on risk of finger-jam

BMW AG - TIS

10.02.2013  04:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing (replacing) Power Window Unit In Left Or Right Front Doo > < 1 RA Disconnecting And Connecting Battery