3 Series E36 M3 (S50) SAL
11 36 010
Removing and installing, sealing/replacing
VANOS adjustment unit (S50 B30)
Interrogate fault memory and make a documentary record.
Remove cylinder head cover,
refer to 11 12 000.
Remove fan clutch with fan impeller and fan cowl,
refer to 11 52 020 / 17 11 031.
If necessary, replace filter screw on VANOS adjustment unit.
Tightening Torque,
refer to Technical Data 11 36 8AZ.
Removal
Removal of VANOS adjustment unit is described separately from
installation. Assembly sequence for removal and installation is
different.
Remove cover from plug connectors.
Disconnect plug connections on solenoid valves.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B30)
BMW AG - TIS
09.02.2013 21:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
