3 Series E36 M3 (S50) SAL
Replace seal in hydraulic piston cover on intake end.
Align recess in hydraulic piston cover on filter screw, insert screws
and tighten down.
Tightening Torque,
refer to Technical Data 11 36 7AZ.
Insert screw connections in solenoid valves.
Fit cover to plug connections.
Fit oil line to VANOS adjustment unit.
Tightening Torque,
refer to Technical Data 11 36 9AZ
Assemble engine.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)
BMW AG - TIS
09.02.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -