3 Series E36 M3 (S50) SAL
Unscrew cover screws and remove cover.
Installation:
Rubber grommets on guides for positive battery lead must be
correctly installed at apertures (1) and (2).
No water leaks!
Remove control unit (2) from retaining brackets.
Lift locking clamp of plug-in connection in upwards direction.
Disconnect connector.
Installation:
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
RA Replacing control module (DME) (S50)
BMW AG - TIS
09.02.2013 22:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
