3 Series E36 M3 (S50) SAL
Adjust angle A = 2-3
°
.
Fit nut.
Tightening torque, refer to Technical Data 12 72 1AZ
Perform function check:
Checking the idling position and/or full load position, refer to
BMW-DIS. If the values are not obtained in spite of new
adjustment, it is necessary to check the adjustment of the throttle
cable,
refer to 35 41 Remove throttle cable
Interrogate fault memory of DME/SMG control unit, check faults
stored in memory, rectify faults, then cancel fault memory.
RA Removing and installing or replacing pedal travel sensor (SMG)
BMW AG - TIS
09.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -