3 Series E36 M3 (S50) SAL
21 00 006
Bleeding clutch hydraulics (SMG)
Remove underbody protection from transmission.
Unfasten nuts and remove clutch slave cylinder (pressure line
remains connected).
Fit special tool 21 5 030 to the clutch slave cylinder (1).
Using spindle, press piston rod (2) into clutch slave cylinder.
Caution!
Do not use force!
Fill expansion tank (1) with hydraulic fluid (Pentosin CHF 11S).
Release bleed screw (3) on supply tank (2) and wait until hydraulic
fluid emerges from bleed screw (3).
Note:
The filling procedure can be speeded up by pumping the
expansion tank a little (1) with special tool 21 5 010 and
17 0 002.
Close bleed screw (3).
Fill expansion tank (1) completely.
RA Bleeding clutch hydraulics (SMG)
BMW AG - TIS
09.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -