3 Series E36 M3 (S50) SAL
Remove heat shield (1).
Remove heat shield from right transmission cross-member.
Remove brackets (1... 2) for exhaust suspension only if fitted.
Remove reinforcement (3).
Installation:
Remove reinforcement (3) with long collar (4) facing forwards.
Unfasten screws.
Installation:
Replace self-locking nuts.
Fit screws with shim.
When tightening down: Grip screw and turn nut. This prevents
the flexible coupling from being subjected to torsion stress.
Tightening Torque,
refer to Technical Data 26 11 1AZ.
Brace propeller shaft on center mount and loosen nuts.
RA Removing and installing transmission (S6S 420G SMG)
BMW AG - TIS
09.02.2013 23:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
