3 Series E36 M3 (S50) SAL
![background image](/bmw/3_Series_E36/M3_S50_SAL/page-394003.png)
Drive in radial seal as far as it will go with special tool 23 2 491 .
Note:
To drive in: use plastic hammer.
Detach special tool 23 2 492 (sleeve) from drive shaft.
RA Replacing radial seal on input shaft (S6S 420G)
BMW AG - TIS
09.02.2013 23:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -