3 Series E36 M3 (S50) SAL
Check and, if necessary, adjust door height - flush.
Correcting:
Loosen striker.
Loosen nuts on hinge (1) and turn door.
In case of considerable deviation, correct thickness of shim on
hinge (2).
Tighten nuts.
Tightening Torque = 21 Nm
Shut the rear door.
Measure, and if necessary, correct sealing distance (A) in height
of upper hinge.
Sealing distance (A): approx. 14 mm.
(1) Inner door sheet metal panel
(2) Sheet metal flange
(3) B-pillar trim panel
Correcting:
Correct the quantity and/or thickness of the shims.
Tighten nuts. Tightening Torque = 21 Nm
RA Aligning front doors
BMW AG - TIS
10.02.2013 04:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -