3 Series E36 M3 (S50) SAL
86 21 ...
Removing lock striker fixture on rear lid
Grip rubber seal on seal piping (1) and pull off in area of lock
striker fixture (2). Grip lid seal (3) on seal piping (4) and pull off
in area of lock striker fixture (2).
Caution!
Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1+2) and remove lock striker fixture (3).
Installation:
Rivets (1) have black heads and long shanks. Rivets (2)
have silver heads and short shanks.
RA Removing lock striker fixture on rear lid
BMW AG - TIS
10.02.2013 10:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -