3 Series E36 M3 (S52) COUPE
Secure crankshaft with special tool 11 2 300 in TDC firing
position of 1st cylinder.
Caution!
Do not turn the engine back.
Remove special tool 11 2 300 before starting engine.
Caution!
Strong spring force.
Unfasten cylinder for chain tensioning piston.
Install special tool 11 4 220.
Fit adjusting screw to tensioning rail.
Tighten tensioning rail with special tool 11 4 220 by rotating the
adjusting screw with special tool 00 9 250 or preload with
standard torque wrench to 1.3 Nm.
RA Checking camshaft timing (M52/S52)
BMW AG - TIS
10.02.2013 02:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -