3 Series E36 M3 (S52) COUPE
32 32 050
Removing and installing/replacing lock
cylinder for steering wheel lock
Car with ring antenna:
Remove lower section of steering column trim.
Using special tool 61 3 300, press ring antenna off
locking cylinder.
With ignition key, use workshop key for better accessibility, turn
lock cylinder to "R" position = radio, windscreen wiper, fan.
Caution!
On vehicles with freewheel lock cylinder up to 10/95: twist lock
cylinder back through 12
°
.
Push special tool 32 3 110 into hole of lock cylinder and swivel
handle forward by approx. 90
°
. Remove lock cylinder.
RA Removing and installing/replacing lock cylinder for steering wheel lock
BMW AG - TIS
10.02.2013 05:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -