3 Series E36 M3 (S52) COUPE
![background image](/bmw/3_Series_E36/M3_S52_COUPE/page-619002.png)
Position sensor on rim flange.
Turn wheel by hand and measure maximum lateral runout,
refer to Technical Data.
Carry out measurement on both rim flanges.
Note:
Dial gauge must be vertical to rim flange.
Important!
Avoid transformation errors during subsequent installation
tasks.
RA Checking rim for face and radial runout
BMW AG - TIS
10.02.2013 07:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -