3 Series E36 M3 (S52) COUPE
41 05 503
Installation solution for straight
shank/hexagon rivet nut
Protection measures!
•
Wear protective goggles
•
Wear protective gloves
Straight shank rivet nut:
Important!
Risk of damage!
Failure to comply with these instructions may result in the drill
bit slipping and causing significant paintwork damage.
1.
Mark position of bore and then punch-mark component
Important!
If the determined drill bit diameter is not observed:
•
the knurling on the straight shank rivet nut is rendered
useless
•
the component will be damaged when the straight shank
rivet nut is inserted
Determining suitable drill bit:
Depending on the rivet nut shank diameter, the next drill bit
diameter higher (5/10 step) can be used.
E.g. with a shank diameter of 10.1 mm, the 10.5 mm drill bit
can be used. The 11.0 mm drill bit must not be used.
RA Installation solution for straight shank/hexagon rivet nut
BMW AG - TIS
10.02.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -