3 Series E36 M3 (S52) COUPE
51 47 000
Removing and installing or replacing
entrance cover strip (coupé interior)
Remove rear side trim panel,
refer to 51 43 000
Remove rear entrance strip from spacer clip by lifting upwards.
Push entrance strip back by approx. 20 mm and remove it.
Compress clips with pliers and pull them out (head of pliers
ground to size).
Installation:
Soak clips for a period in water.
Install clips and align.
If necessary, replace damaged clips.
RA Removing and installing or replacing entrance cover strip (coupé interior)
BMW AG - TIS
10.02.2013 09:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -