3 Series E36 M3 (S52) COUPE
52 10 000
Removing and installing left or right front seat
Note:
Run seat forward as far as possible.
Run seat up as far as possible.
Unscrew bolts.
Installation:
Fitting corrugated disc.
refer to Technical Data 52 10 1AZ
Run seat back as far as possible.
Caution!
Deactivating belt-lock tightener:
Manual Seats:
Turn toggle 90
°
and detach cable upwards.
Installation:
Attach cable carefully.
Check for correct seating of cable.
Seat belt lock tensioner will not work if seating is incorrect!
Refer to General Information,
refer to 72 11 030
Caution!
Deactivating belt-lock tightener:
Power Seats:
Turn slotted head screw until green mark in sight glass changes to
red.
Installation:
Turn mark to green.
Seat belt lock tensioner will not work if at red mark!
RA Removing and installing left or right front seat
BMW AG - TIS
10.02.2013 09:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -