3 Series E36 M3 (S52) COUPE
31 12 Control Arms and Struts
Type
Thread
Tightening specification
Measure
1AZ Tension strut to front axle support
E12, E24 / until
5.82
tighten in normal position
80 Nm
E23
tighten in normal position
135 Nm
E39, E52
tighten in normal position
110 Nm
E53
Replace screw
tighten in normal position
165 Nm
E60, E61, E63,
E64, E65, E66,
E67
M12 10.9
Replace screw & nut
tighten in normal position
Jointing torque
100 Nm
Torque angle
90
°
E83
Replace screw
tighten in normal position
Jointing torque
165 Nm
Torque angle
90
°
2AZ Control arm to front axle support
E24 / from
5.82, E28, E31,
E32, E34, E38,
E39 / 8 cyl.
tighten in normal position
77,5 Nm
E39 / 6 cyl.,
E52
tighten in normal position
110 Nm
E12, E21, E23,
E24 / until 5.82
tighten in normal position
85 Nm
E53, E60, E61,
E63, E64, E65,
E66, E67, E83
M12 10.9
Replace screw & nut
tighten in normal position
Jointing torque
100 Nm
Torque angle
90
±
15
°
3AZ Control arm (ball joint) on front axle
support
E30
Replace nut
85 Nm
E36, E46
Replace nut
90 Nm
AZD Control Arms and Struts
BMW AG - TIS
10.02.2013 16:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -